Acorn tests by hand

• How to run JTAG by hand on an Acorn on a Raspberry Pi 5: detect the card and load a design.

• How to run JTAG by hand on an Acorn on a Compute Blade: the same, on a blade taken out of service.

• How to check an Acorn’s PCIe link by hand on a Raspberry Pi 5: the card on the bus, detached, and brought back.

• How to check an Acorn’s PCIe link by hand on a Compute Blade: the same, on a blade taken out of service.

• How to run the pin ID test on an Acorn on a Raspberry Pi 5: which wire is on which pin.

• How to run the pin ID test on an Acorn on a Compute Blade: the same, on a blade taken out of service.

• How to run the Acorn UART and GPIO loopback on a Raspberry Pi 5: the serial pair and the spare wires.